We are pleased to be sponsoring the SGF Cybersecurity Week 2023 in Amsterdam. The event draws together power grid CISOs and their IT and OT cybersecurity leads to review recent cybersecurity implementations and collaborate on getting the power grid ahead of the threat. We cordially invite all participants to visit us at the booth during the exhibition from May 16th to 18th 2023!
IPCOMM is an exhibitor at the Consulectra Symposium "Netzleittechnik 2023" in Hamburg on March 21st/22nd, 2023. The event is dedicated to the current issues of the power supply industry in the field of network management and network control technology. All participants are cordially invited to learn about our solutions for today's challenges in grid operation.
With ipConv/Cloud we present the newest product in our ipConv product family. ipConv/Cloud enables the deployment of protocol conversion services in the cloud and on Linux-based devices. Besides additional security procedures for multi-factor authentication, ipConv/Cloud supports the integration of Serial Device Servers for serial communication via Ethernet.
From now on the protocol stacks BACnet, Client and BACnet, Server are available for our universal communication solutions. BACnet is a global communication standard for building automation and control networks, which has been defined by the ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers).
Physically disconnect Ethernet connections with the Ethernet Line Breaker ipELB. This new solution for cybersecurity in industrial networks offers you full control over your network infrastructure. ipELB enables reliable automation of four 10 Gigabit Ethernet ports via standardized protocols and an integrated digital I/O module.
The new SEC3M hardware model complements our family of the SEC3x Embedded Controllers with a device equipped with a 4G LTE cellular modem, and is available in combination with products ipRoute, ipConvLite and ip4Cloud. Enabling the worldwide connection of communication partners beyond the boundaries of heterogeneous networks, it stands out with its secure and reliable wireless communication.
Discover our gateway software ipConv 4, which is supporting you in communication tasks with many new features. Recurring tasks are significantly simplified by the new, dynamic web interface. Advanced interaction techniques, optimized loading times, and improved clarity provide the perfect foundation for efficient workflows.
More information can be found in the following article.
This year again we were present at the SPS - Smart Production Solutions 2019 in Nuremberg. The international exhibition for automation, control and drive technology offers the perfect platform for professional discussion between experts from all fields of smart and digital automation.
[Image: Mesago Messe Frankfurt GmbH / Mathias Kutt]
For the third time IPCOMM was part of the
IPCOMM attended this year's OPC Interoperability Workshop, which took place from 22nd to 26th October in Nuremberg, Germany. The annual event is addressed to manufacturers of OPC UA products to test hardware and software components for interoperability, conformity and reliability.
As part of the workshop, the protocol stacks OPC UA 1.02, Client and OPC UA 1.02, Server were successfully tested with devices from other manufacturers.
Benefit from our new
We are proud to announce the release of the OPC UA Client protocol stack from the OPC UA protocol family. OPC UA was specified by the OPC Foundation, and is considered a trailblazer for industry 4.0 and the Internet of Things (IoT).
For the second time IPCOMM was part of the
We would like to thank you for the very positive feedback of this year's customer survey. 91 percent of the survey participants assessed IPCOMM products better than competing products, 36 percent even much better; our service was also assessed better than competitors (90 percent), 55 percent even much better. 83 percent of the participants would recommend us without reservations. Of course, we also received only a few critical comments on which we are intensively working.
We will be glad to give you the information about our product portfolio and our range of services in a free webinar, live and online. Or you decide to participate in a first-hand basic course or expert training that meet your individual situation and requirements.
For the second time, IPCOMM participated as exhibitor in IEC 61850 Europe 2016 in Amsterdam. This conference is an ideal networking forum for IEC 61850 experts from all over the world.
Now, our product spectrum comprises gateways with integrated PROFIBUS-DP master or slave interface as well as gateways with PROFINET-IO master or slave interface. ipConvPBM, ipConvPBS, ipConvPNS and soon ipConvPNM are based on ipConvLite and are available together with the hardware platform MEC2 PROFIBUS or MEC2 PROFINET.
As a device with Profibus or Profinet interface the high performance controllers MEC2 PROFIBUS and MEC2 PROFINET replace the so far used HECPS and HECPM.
At a workshop of the OPC foundation® from 2nd to 6th of November 2015 in Nuremberg, OPC UA 1.02, Server was successfully tested with OPC clients of other producers.
Protocol stack security enhancements based on IEC 60870-5-104 and IEC 61850 according to the standard IEC 62351
We are launching MEC2. The embedded controller impresses with the fivefold performance compared to the predecessor and further considerable features. Optionally available with 3G/GPRS module.
The IPC191V4 19" 1U, fourth and latest version of our proven industrial PC, is up to three times faster than its predecessor and captivates with a significantly higher processor performance and many more interfaces.
ipConv goes to the next round with version three. The third generation of ipConv offers a number of new and useful features; some already known functions have been clearly improved. New features among others are the version control, keeping logbooks, license management, operation mode change and language selection.
IPCOMM participated as exhibitor in IEC 61850 Europe 2014 in Prague - the premier conference and networking forum for substation automation professionals. The ideal information platform to profit from first-hand expert knowledge and to introduce our innovative communication solutions.
The protocolstack RP 570, Master was developed due to several customer inquiries.
Our procucts were very well received by visitors of the E-World Essen, the leading European fair for the energy and water industry. Aside from numerous new contacts, regular customers sought the dialogue with us.
IPCOMM celebrates its 10th anniversary. Since it was created in 2004 we prove our competences in global communication.
We developed and implemented the protocol stacks ELCOM-90 Initiator, Client and ELCOM-90 Responder, Server on customer request to enable communication with an ELCOM-90 remote control station.
IPCOMM presents you its new free online service to visualize IEC 61850 SCL files. The web based SCL Explorer provides a quick overview about your SCD, ICD and CID files and allows a simple way to analyze the configuration data contained therein. Give it a go!
IPCOMM had set up a booth for the second time at the Energy 2013, the world's leading energy technology fair in Hannover. Numerous visitors showed interest in our products, innovations and communication solutions.
We expanded our hardware range by a 4 kV RS-232 Isolator. A powerful isolation protects your equipment and data against external influences in compliance with the standard IEC 61850-3.
The recent service for our ipConv customers is a number of training videos visualizing function and usage of ipConv. They also provide assistance in complex processes.
Within the OPC AE specification, the OPC Classic product familiy is expanded by the protocol stacks OPC AE 1.10, Client and OPC AE 1.10, Server.
Now Gateway Performance Charts illustrate a comparison of the performance of IPCOMM gateways.
The new hardware model IPC191I5 19" 1U expands our high end hardware range. With a performance up to 4 times higher than IPC191V3, especially CPU intensive applications are realizable.
We took part in the Hannover Fair 2012 for the first time and with great success. We established numerous and interesting contacts during the fair.
After approx. 6 weeks development stage we delivered the protocol stack RP 570, Slave to a swedish power supply company.
Only three months after the completion of the protocol stack TASE.2, Server, TASE.2, Client is finished and become part of our standard product portfolio.
Now, development of the protocol stack TASE.2, Server is completed. With immediate effect, we can offer this protocol stack within the ipConv product familiy.
For a Belgian project we implemented the protocol stack Telegyr 065, Master. The test is done with a respective RTU.
Although in use for more than ten years, the protocol stack IEC 60870-5-101, Slave has been certified on customer request. Certification was performed by KEMA within two days and without claim.
The protocol stack Indactic 33/41, 2033, Master was implemented for a Swiss project and can be used on a regular basis in conjunction with the module TCT.
The protocol stack IEC 61850, Client is certified by KEMA. All tests are successfully passed within one week (record!).
A new member belongs to our product family. The model SEC2 is especially designed for small applications in decentralised use and is availabe at a particularly low price. The hardware can be used in conjunction with ipConvLite and ipRoute.